PU-Cleaner
PU-cleaning-fluid
Product Description:
 Ideal cleaner for use after installing and for maintaining factory-cured floor coverings. Removes dirt, fat, grease and shoe marks. Does not leave a residue. 750ml Bottle

Areas of Application: Ideal cleaner for use after installing and for maintaining KRADAL Flooring and factory cured floor coverings made of PVC, CV, rubber, and polyolefin.

Method of Application: 
Cleaning after installation: Remove coarse dirt using a brush or vacuum cleaner. In case of stubborn dirt, dilute PU Cleaner in a ratio of 1:10 (1 litre to 10 litres of water), reducing the concentration accordingly for slight soiling. Distribute the cleaning solution over the floor and, after allowing to stand for a short time, treat the floor surface using a scrubbing brush. Where larger areas are involved, the Monodisc should be used with red pad or scrubbing brush. Take up the dirt using a wide-headed absorbent wiper mop, for larger floor areas using a Spray Extractor machine with hard floor adapter. Wipe over with clear water to neutralise. 
Consumption: approx. 1 l = 50- 100 m²

Daily Cleaning: Dilute PU Cleaner in a ratio of 1:200 (50 ml to 10 litres of water) and wipe over the floor using this solution. The concentration can be reduced to 1:400 (25 ml to 10 litres of water) when using a fully automatic cleaning appliance. 
Consumption: 1 l = 1000 m²

Notes: 
1) Sensitive surfaces (such as wood, metal, furnishings) should not be sprayed with the cleaning solution.

Usually ships in: 14 days